? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 2.5 v gaas spdt switch 0.5 - 3.0 ghz rev. v2 maswss0167 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? low voltage operation: 2.5 v ? low insertion loss: 0.3 db at 1 ghz ? isolation: 34 db @ 2.4 ghz ? 0.5 micron gaas phemt process ? lead-free 1.2 x 1.5 mm 6-lead pqfn package ? 100% matte tin plating over copper ? halogen-free ?green? mold compound ? rohs compliant* and 260c reflow compatible description m/a-com?s maswss0167 is a gaas phemt mmic single pole double throw (spdt) switch in a lead-free 1.2 x 1.5 mm 6-lead pqfn package. the maswss0167 is ideally suited for applications where low control voltage, low insertion loss, moderate isolation, small size and low cost are re- quired. typical applications are for filter and antenna switching in wireless lan systems that connect separate receive functions to a common antenna, as well as other handset and general purpose switching applications. the maswss0167 is fabricated using a 0.5 micron gate length gaas phemt process. the process features full passivation for performance and reliabil- ity. pin no. pin name description 1 rf1 rf in/out 2 gnd rf ground 3 rf2 rf in/out 4 v2 control 2 5 rfc rf common 6 v1 control 1 pin configuration * restrictions on hazardous substanc es, european union directive 2002/95/ec. parameter absolute maximum input power (0.5 - 3 ghz, 2.5 v control) +32 dbm operating voltage +8.5 volts operating temperature -40c to +85c storage temperature -65c to +150c absolute maximum ratings 2,3 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a-com does not recommend sustained operation near these survivability limits. functional schematic ordering information 1 part number package maswss0167tr-3000 3000 piece reel MASWSS0167SMB sample test board 1. reference application note m513 for reel size information.
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 2.5 v gaas spdt switch 0.5 - 3.0 ghz rev. v2 maswss0167 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: t a = 25c, v c = 0 v / +2.5 v, z 0 = 50 4 parameter test conditions units min. typ. max. insertion loss 5 1 ghz 2 ghz 3 ghz db db db ? ? ? 0.30 0.40 0.50 0.50 ? ? isolation 1 ghz 2 ghz 3 ghz db db db 23 ? ? 25 27 24 ? ? ? vswr 0.5 - 3.0 ghz ratio ? 1.1 ? ip3 two tone, +10 dbm/tone, 5 mhz spacing, > 50 mhz dbm ? 48 ? p1db ? dbm ? 28 ? trise, tfall 10% to 90% rf, 90% to 10% rf ns ? 30 ? ton, toff 50% control to 90% rf, and 50% control to 10% rf ns ? 35 ? transients in band mv ? 60 ? control current |v c | = 2.5 v a ? 1 5 linear pout 2.5 ghz, ofdm, qam-64,54mbps, evm=2.5% 2.5 v 3.0 v 5.0 v dbm dbm dbm ? ? ? 21.0 23.5 28.5 ? ? ? 4. for positive voltage control, external dc bl ocking capacitors are required on all rf ports. 5. insertion loss can be optimized by varying the dc blocking c apacitor value, e.g. 1000 pf for 100 mhz - 500 mhz, 39 pf for 0. 5 - 3 ghz. handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. v1 v2 rfc - rf1 rfc - rf2 0 1 on off 1 0 off on truth table 6 6. 0 = 0 0.2 v, 1 = 2.5 to 5 v
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 2.5 v gaas spdt switch 0.5 - 3.0 ghz rev. v2 maswss0167 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves insertion loss lead-free 1.2 x 1.5 mm 6-lead pqfn ? ? reference application note m538 for lead-free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. evm vs. pout @ 2.5 ghz 0.0 0.2 0.4 0.6 0.8 0.51.01.52.02.53.0 +25c -40c +85c frequency (ghz) isolation 0 10 20 30 40 0.5 1.0 1.5 2.0 2.5 3.0 +25c -40c +85c frequency (ghz) return loss 0 10 20 30 40 0.5 1.0 1.5 2.0 2.5 3.0 +25c -40c +85c frequency (ghz) 0 2 4 6 8 10 10 15 20 25 30 35 evm @ 2.5 v evm @ 3.0 v evm @ 5.0 v pout (dbm)
|
